Trail Gear 10in HD Ram and Clevis Kit

Rock Assault Double-Ended Ram and Clevis Kit, 2.5 Bore x 1.375 Rod This is the ram you have been looking for if you are building a rig for off-road racing or rock crawling competitions and need extra steering force for the largest tires. Our Rock Assault Heavy-Duty Double-Ended Ram has a one-piece 1 3-8 35mm diameter 4340 chromoly steel rod that is more resistant to bending under heavy steering loads. We also increased the bore size to 2 1-2in 64mm to give you 5,649 lbs. of force at 1650 psi 15 more force than our standard Rock Assault Double-Ended Ram. Of course, we kept all the features that made our standard Rock Assault Double-Ended Ram so reliable. We still have dual rod seals on each end to prevent fluid leakage under heavy loads, and polyurethane wiper seals on each end protect the seals from dirt and debris. Dual piston wear bands and rod bushings on each end allow the ram to absorb much higher side loads than other double-ended rams. The triple-lip piston seal prevents fluid bypass and gives you consistent steering with no drift. The cylinder has a black zinc-plated finish to prevent corrosion, and the 6 JIC steering ports will work with all standard 6 JIC fittings. The rod has 3-4 16 female threads on each end. Available in your choice of 8 203mm, 8-3-4 222mm, or 10 254mm stroke. This kit contains everything you need to mount your ram to almost anything on your rig. We also include our Clevis End Kit that will work with your 3-4 rod ends. Kit Includes: (1) 8, 8.75, or 10 Heavy-Duty Double-Ended Ram (4) Ram Clamps and Weld-On Ram Mounts with mounting hardware (2) Clevis Ends (2) Clevis End Bolts (2) Grade 8 Bolts (4) Spacers Note. If you are using our Rock Assault 9 Housing, you will need to use the 10 Ram for your steering setup. Note. Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid is not recommended and will void the warranty.